König Electronic CMP-NWIPCAM11 Manual De Uso página 7

Parameter settings for IP Camera
In the main menu several parameters can be configured.
System Setting of IP Camera
1. Click , and the IP Camera parameter setting interface appears, as shown
in the following figure:
The interface for setting System parameters of the IP Camera is shown in the above
figure. You may set the time, name, upgrade page, and capturing/recording path of the
IP Camera.
[Time Sync]: Click the button to synchronize the time with the PC (set to the default
value when being delivered out of factory).
[Enable NTP]: Click to enable the NTP setting switch.
[Time Zone]: Select the correct time zone in the drop-down list on the right.
[NTP server]: Enter the IP address or http address of the time server, for example,
clock.isc.org.
[Upgrade]: not in use
[Storage parameter]: Used to set the storage location to store recorded files and
captured images.
[Record file path]: Set the directory for storing recorded files and images. Default
path is C:\XDNVS.
[Capture file path]: Set the directory for storing captured images. The default path is
C:\XDNVS.
7