Static Mode; Alarm Mute - Apex Medical DOMUS AUTO 9P-077520 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
English
English
4.3 Low Pressure Function
When an abnormal low pressure is occurred, the Low Pressure indicator (yellow LED) will light up.
Check that connections are correctly made and that they are correctly installed as per installation
instructions.
NOTE - If the pressure level is consistently low, check for any leakage (tubes or connecting
If the pump unit is equipped with alarm buzzer, the alarm will buzz and the Low Pressure indicator
light up when air pressure is below normal. To mute the alarm, simply press the
panel. However, the low pressure indicator remains until the low-pressure fault condition is solved.

4.4 Static Mode

Press the
the mattress will be back to alternating therapy mode.

4.5 Alarm Mute

When low-pressure situation occurred, both the LED light and buzzer will sound off to warn the
patient. By pressing the button, it will temporary mute the buzzer so the care giver may check for
possible air leaks. Should the situation not resolved within 3 minutes; the alarm will resume to
beep.
hoses). If necessary, replace any damaged tubes or hoses. Or contact local
qualified dealer for repair.
button to suspend the alternating mode of mattress. By pressing this button again,
10
button on the

Publicidad

Tabla de contenido
loading

Tabla de contenido