Casals FC14 Manual Del Usuario página 9

J Fixing bolt
K Dust suction adapter
L Depth adjustment wing nuts
M Depth adjustment wing nut
N
Depth adjustment rule
O Moving base unlocking wing nut
P Adjustment wheel
Q Fixed base
R Handle
S Movement reference
Assembly
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
1 Assembly of the router bit (Fig 2)
- The router is supplied with a 6 mm collet for working
with 6 mm router shank.
- Press the locking button (C) and turn the shaft until
it locks.
- With the spanner (D) loosen the nut by turning it
anticlockwise.
- Insert the cutter (G) into the nut +collet (E+F)
- Completely insert the cutter shaft inside the shaft of
the machine.
- Press the locking button and turn the shaft until it
locks.
- With the spanner (D) tighten the nut by turning it
clockwise until the router bit is completely fixed.
2 Removing the moving guide (Fig 3)
- Loosen and remove the fixing knob (I) by turning it
anticlockwise
- Push the fixing bolt of the base (J) until it is
completely removed.
- Pull the moving base (H) until it is completely
removed.
- Insert the fixing bolt of the base (J) into the hole of
the adjustment wing nut (P)
- Screw the fixing knob (I) into the thread of the fixing
bolt (J).
3 Connecting the dust suction adaptor (Fig 4)
- Remove the moving base (H) of the router.
- Position the holes of the dust adapter (K) in the
threaded lugs of the base.
- Screw the dust suction adapter (K) into the base by
turning the bolts in the bottom of the base.
- Connect the adapter nozzle to the dust suction
adapter (K)
Operating
Before use:
- Make sure that all the product's packaging has been
removed.
- Unplug the appliance from the mains.
- Prepare the appliance according to the function you
wish to use:
4 Adjustment of depth
Option 1 (Fig 5)
- Loosen the wing nuts (L).
- Use a hinge or any object which has the desired
cutting depth and position it supported on the moving
base (H).
- Push the base in such a way that the columns move
until the router bit is on exactly the same plane as
the hinge.
- Tighten the wing nuts (L).
Option 2 (Fig 6)
- Loosen the wing nuts (L).
- Position the machine on the surface to be cut and
push the handle (R) until the cutter comes into contact
with the surface to be cut.
- Tighten the wing nuts (L) to lock the router in the
cutting start position.
- Loosen the wing nut on the depth rule (M).
- Move the depth rule (N) until it abuts with the lug of
the base
- Move the depth rule (N) upwards. The millimetres
moved are the equivalent of the cutting depth.
- Once the cutting depth is fixed, tighten the wing nut
on the depth rule (M).
5 Adjusting the moving base (Fig. 7)
- Loosen the wing nut (O) to unlock the movement of
the moving base (H).
- Use the adjusting wheel (P) to adjust the transverse
movement of the moving base (H).
- To adjust the moving base (H) there is a scale in
millimetres on both sides of the base.
- Use the end of the base (S) as a movement
reference (S).
- Once you have completed the adjustment, tighten
the wing nut (O).
Use:
- Before connecting the power cord to the mains
power supply ensure the switch is in the off position.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off switch (A)
9