Honeywell Miller 1016847 Instrucción De Utilización página 4

Energyabosrber lanyards type Manyard® edge / Energy absorbing lanyards of the ø 12mm
«edge tested» line type (resistance to tearing on edge tested) by Miller®
THIS USER MANUAL IS SUPPLIED WITH THE PRODUCT AND MUST BE READ BEFORE INITIAL USE AND THE
WHEN THE BUYER IS NOT THE USER, HE MUST SUPPLY THIS MANUAL TO THE USER .
Description of components:
2
5
1 Extending lanyard, length 2 m (strength tested
for tearing on edge)
2 Tubular strap + built in energy absorber of PES
3 Aluminium karabiner, (1017916) / Steel
karabiner (1017918) opening 18mm (EN
362:2004) [D side on back of harness: use on
edge]
4 Aluminium hook, opening 60mm (EN 362:2004)
/ aluminium screw karabiner, opening 18mm
(EN 362:2004) [anchorage side: use on edge]
5 Fall indicator
2
5
4
NT90018658 IND I.indd 4
General instructions for use
Conform to EN 355:2002 and pr EN 354:2006 (annex B)
INSTRUCTIONS IT CONTAINS COMPLIED WITH.
(in the event of an inaccuracy, please consult the manufacturer)
Manyard® edge type energy absorbing lanyards
1 3
Ref. 1017918
3
Ref. 1017916
1
Horizontal use (fall on edge possible):
- Comply with the assembly direction of the
lanyard as described on the labels.
- Attach the end with an absorber (3) to the back
D-link of the fall arrest harness in compliance
with standard EN361.
4
- Lanyard end (4) is attached to an anchorage
point in conformity with standard EN 795.
End n°3
Before fall
After fall
4
After a fall, the energy absorber lanyard must
*
be decommissioned immediately (fall indicator
triggered).
Any other configuration is only authorized for
*
vertical use.
End n°4
19.12.2014 10:06