Technical Data; Safety Instructions; English; Mains Connection - AEG HG 560 D Manual Original

TECHNICAL DATA

Heat Gun
Production code
Rated input
Air temperature
Level 1
Level 2
Air volume
Level 1
Level 2
Weight according EPTA-Procedure 01/2003
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference.
GB

SAFETY INSTRUCTIONS

This appliance can be used by children aged
from 8 years and above and persons with red-
uced physical, sensory or mental capabilities
or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
Danger of fire if not used properly!
Take care if using the device in the vicinity of combustible
materials. Do not direct the device towards the same place for long
periods.
Do not use the device in rooms with a potentially explosive
atmosphere.
Do not use the device in rooms in which easily flammable material
or gases may be present.
Heat can be conducted to combustible materials that are concealed.
Do not leave the appliance unsupervised when it is switched on.
Do not use the device outside if it is raining.
Do not touch the hot air nozzle during operation (danger of
burning!).
Never cover or close the hot air nozzle.
Do not point the hot air flow at people.
Do not use the device as a hair dryer.
Allow the device to cool down for a while after use before packing
it away.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Always disconnect the plug from the socket after use.

English

6
HG 560 D
4410 16 02...
4410 21 02...
... 000001-999999
1500 W
300 °C
560 °C
253 l/ min
420 l/ min
850 g
Before use check machine, cable, safety harness and plug for any
damages or material fatigue. Repairs should only be carried out by
authorised Service Agents.
If the supply cord of this appliance is damaged, it must only be
replaced by a repair shop appointed by the manufacturer, to avoid
hazardous situations.
SPECIFIED CONDITIONS OF USE
The device is suitable for soldering copper pipes, galvanizing
bodywork parts, welding plastics, thawing out water pipes or
heating metal parts

MAINS CONNECTION

Connect only to single-phase AC system voltage as indicated on
the rating plate. It is also possible to connect to sockets without an
earthing contact as the design conforms to safety class II.
Always disconnect the plug from the socket before carrying out any
work on the machine.
Only plug-in when machine is switched off.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Use only AEG accessories and spare parts. Should components
need to be replaced which have not been described, please contact
one of our AEG service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label
and order the drawing at your local service agents or directly at:
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden,
Germany.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under "Technical Data" fulfills all the relevant provisions of the
directives
2011/65/EU (RoHS)
2006/42/EC
2014/30/EU
and the following harmonized standards have been used.
EN 60335-1:2012
EN 60335-2-45:2002 + A1:2008 + A2: 2012
EN 62233:2008
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
HG 600 V
4410 26 02...
4410 31 02...
... 000001-999999
2000 W
90 - 600 °C
90 - 600 °C
345 l/ min
434 l/ min
900 g