Human Touch ht 1650 Manual De Uso Y Cuidado página 13

care and maintenance
To keep your product working and looking its best, please follow
these simple care guidelines.
Cleaning:
1. Be sure to unplug before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum cleaner.
4. If the backrest or armrests become dirty, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the remote control or around the power switch, use a dry cloth only.
Never use a damp cloth to clean the controller or power switch.
Fabric Care:
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. Faux Suede products can also be brushed with a suede brush. Wipe with a slighty damp cloth as necessary. For
tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be wiped down
occasionally with a leather furniture cleaning solution.
WARNING:
Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the colour does not fade
prior to using the solution on the entire product surface.
Maintenance and Repair:
1. The mechanisms of this product are specially designed and constructed to be maintenance free. No periodic lubrication
or servicing is required.
2. Your chair should only be serviced by an authorised service centre.
Storage:
1. When not in use for a long period of time, we recommend that the chair be covered, the power lead be coiled and
that the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time.
This may cause fading or damage.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.
www.humantouch.com
24
Moving your massage chair after it has been unpacked:
Your massage chair is a precision instrument that can be damaged if dropped.
Use at least two people to move it.
1. Fully retract the foot and calf massager.
Make sure the area behind/underneath the footrest is clear of any
obstructions before retracting the footrest.
NEVER pick up the chair by grasping the foot and calf massager.
DO NOT LIFT HERE
2. Store the remote control in the side pocket.
3. Grasp the chair at floor level, beneath the side arms.
Your Human Touch massage chair has two fuses:
one for the chair and one for the convenience outlet.
To replace a fuse:
1. Turn the Power switch to OFF and unplug the chair from the wall outlet.
2. Turn the fuse holder (located on the power panel) approximately 1/8 turn
counter-clockwise. The fuse holder pops out.
3. Replace the fuse with a new fuse of the same value, then reinsert the fuse
holder into the power panel.
4. Turn the fuse holder 1/8 turn clockwise to secure it.
5. Plug the chair back into the wall outlet and turn it on.
WARNING:
This product is equipped with a thermal resetting protection device. This is an added
safety feature to protect you and this product from overheating. If the product should suddenly stop
and will not start, turn the main power switch, located on the back of the product, off and do not
operate the product for at least 30 minutes. Failure to turn the product off may result in the product
starting unexpectedly when the device cools.
25