Using The Equipment For The First Time; Operation; Storage; Moving The Diesel Trolley - CEMO K10C Manual De Instrucciones

GB

4. Using the equipment for the first time

1. Remove the transport tie-down (red tie-wrap)
of the delivery nozzle.
Place the delivery nozzle in the delivery nozzle
holder and close the delivery nozzle lock.
2. Permanently affix the "Hazard label with
UN1202" from the supplied tank documen-
tation on the front side.
3. Place the diesel trolley in a horizontal position
and remove screw cap a .
Filling the tank
i
Important!
Please always use an automatic delivery
nozzle to avoid overflows.
14
4. Perform a test filling as described in
5. Close the filling opening with the
The filling station is now ready for operation.
Hazard label
with UN 1202

5. Operation

5.1 Storage

• do not expose the high-grade plastic tank to
Suitable storage conditions:
• ambient temperature: -10°C to +40°C
• floor: level and smooth (without pointed

5.2 Moving the diesel trolley

Note that considerable downhill forces arise on
steep slopes.
section 5.6, but hold the delivery nozzle in
the still open filling opening.
screw cap.
Also close the ventilation cap in the
screw cap.
Important!
Material damage (deformation) of
the tank from excessive heating or
mechanical overload.
direct sunlight for extended periods either
during transport on the vehicle or when in
storage.
(cover or take other suitable measures when
storing outdoors)
projections)
i
Important!
The completely filled diesel trolley is
heavy.
Screw cap
Ventilation cap
Fig. 01