Salamander FPS Serie Guia De Instalacion página 14

Route Cables from Display to Stand
Manage cables carefully. Use cable ties to keep wires away from pinch points.
• Route cables between the back of display and the hole on the front of stand.
• Manage cables through cable chain by pushing in the direction shown in arrows.
Operation: Remote Control
• Hold down the "down" button to initialize unit.
• Up button will raise display to presentation mode
• Down button will lower display to transport mode.
Troubleshooting
• Double check that power cord is fully plugged into power supply
•
Hold down the "down" button continuously for several seconds to reset unit
• More troubleshooting and repair information found on page four of this manual
LIMITED LIFETIME WARRANTY
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
Full warranty including limitations and warranty claim information may be found at www.salamanderdesigns.com/commercial
Salamander warrants the following components of its commercial Video Display Mount products against the following defects for the following periods:
MECHANICAL DISPLAY STANDS AND MOUNTS: Salamander warrants against manufacturing defects for two (2) years from the date of purchase.
Salamander will repair or replace, at our option, any product defective in materials or craftsmanship.
Salamander Mobile Interactive Display Stands 500-680 [01.16] page 14 of 14