Bravox BVX-D930 Manual De Uso página 14

REMOTE CONTROL
1. POWER
Press to turn on or off the unit.
2. MODE
Press this button to select one of the following modes: RADIO, DVD, USB, SD or AV.
3. DISP
In DVD mode, press the DISP button to display the following information: Title Elapsed, Title Remain, Chapter Elapsed, Chapter
Remain; Display Off.
In VCD/CD mode, Single Elapsed, Single Remain, Total Elapsed, Total Remain, Display Off.
In MP3/WMA mode and when the car is parked, hold down the DISP button on the remote control to display the file list or single file
information on the unit display.
Note:
This function does not work when the car is driven that only the single file information can be displayed.
4. P/N (PAL/NTSC)
In DVD and VCD mode, press to select the PAL, MULTI or NTSC system.
5. SETUP
In DVD playback mode, press to display system SETUP menu, you can adjust the settings to your preference.
6.
[fast backward/fast forward][previous track/next track][up/down/left/right] and then press ENTER to access the selected item or
confirm the selection in the system setting menu.
7. TITLE
In DVD playback mode, press the button to display the title menu.
8. ANGLE
Press to change the camera angle in DVD mode (Available only when it was shot at different camera angles).
9. CLEAR
Press to clear an entry.
10. VOL-/VOL+
Press to adjust the volume.
ENTER
14