Barrette Crossover product Instrucciones De Instalación página 4

4.
Insert the left-side frame rail into the top
frame rail (Fig. 8).
Use a framing square to ensure the gate is
properly aligned. Now the gate is ready for
permanent assembly (Fig. 9).
(Fig. 8)
(Fig. 9)
4
5.
SIDE WITHOUT HARDWARE:
Use the drilling template on page 9 of this
instruction sheet to mark the location of
the assembly screws (Fig. 10).
Using a 5 ⁄ " bit, pre-drill at all four
32
locations on the top and bottom corners
of the side that will not receive hinges (Fig.
11), and secure with the included assembly
screws (Fig. 12). Do this for all four corners
on this side of the gate.
(Fig. 10)
(Fig. 11)
(Fig. 12)