DuraMax 10028940 Manual De Instrucciones página 33

Please test to see if camera GPRS module can work properly by following steps below before
test MMS/ SMTP/ FTP functions.
• Switch ON GPRS, press OK to turn on camera, then user will see GPRS SETTING... same
like photo below;
• Wait for about 30 sec, GPRS signal search completes;
Note: camera will enter "Power On" auto working mode within 1 minute after signal search;
• Signal strength bar will display on screen same as picture below.
Note: screen will show No SIM if SIM card is not inserted.
• Please test MMS, SMTP, and FTP functions only after signal bar appears.
GPRS (10028940 only)
33