Senix GTSX5-M-0 Manual De Instrucciones página 11

Always wear eye, hearing, hand, foot and body
protection to reduce the risk of injury when operating
this unit. Keep all parts of your body away from the
rotating cutting attachment and hot surfaces.
To prevent serious personal injury, avoid arm contact
with the engine while operating the unit. The engine
may be extremely hot.
not bend over.
arm slightly bent.
straight.
ground.
from the rotating cutting attachment and hot surfaces.
swing the trimmer in a left to right cutting motion.
There is an embossed arrow on the top of the safety
guard indicating the preferred left to right direction of
trimmer operation.
When trimming around trees, posts, fences, etc., rotate
the whole unit so that the cutting head is at a 30° angle
to the ground.
Maintaining the Trimming Line Hard surfaces, such as
sidewalks, can cause the trimming line to wear down
quickly or break.
the trimming line as needed.
passes as are necessary to achieve the desired
depth. Cut at a slow, even pace.
from your body.
from wrapping around the shaft housing and string
head which could cause damage from overheating.
STOP THE TRIMMER and remove the grass.
head into uncut grass.
which can cause the line to break.
cutting width and performance.
WWW.SENIXTOOLS.COM
cutting head slightly down to the right; whenever
possible swing the trimmer in a left to right cutting
motion. There is an embossed arrow on the top of
the safety guard indicating the preferred left to right
direction of trimmer operation.
NOTE: Some line breakage will occur from:
posts
11