GYS POWERDUCTION 10R Manual De Instrucciones página 8

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be followed
for your safety. Please read it carefully before using the device for the
first time and keep it in a safe place for future reference. Read and
understand the following safety recommendations before using or ser-
vicing the unit. Any change or servicing that is not specified in the in-
struction manual must not be undertaken. The manufacturer is not lia-
ble for any injury or damage caused due to non-compliance with the
instructions featured in this manual . If there is any issue or uncertainty,
please consult a qualified individual to operate the equipment correct-
ly. This machine should only be used for operations comprised within
the limits indicated on the machine and in the instruction manual. The
operator must observe the safety precautions. In case of inedaquate
or unsafe use, the manufacturer cannot be held liable for damage or
injury. Any other uses not specified in this manual is forbidden, and
possibly dangerous. The product is semi automatic and requires the
presence of an operator.
This unit can be used by children aged 8 or over and by people with
reduced physical, sensory or mental capabilities or lack of experience
or knowledge, if they are properly monitored or if instructions for us-
ing the equipment safely have been read and risks made aware of.
Children must not play with the product. Cleaning and maintenance
should not be performed by an unsupervised child.
Ne pas utiliser l'appareil, si le cordon d'alimentation ou la fiche de
secteur sont endommagés.
Ne pas couvrir l'appareil.
Do not obstruct the cooling vents. Refer to the installation section be-
fore operating the machine.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep airbags, gas cannisters or other pressurised gas containers
away from the induction heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and may
cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling them.
• Check that jewellery (such as wedding rings) or other metal pieces
do not get close to the induction heating machine or the inductor
when switched on.
• Remove any jewellery or any metal object from yourself before
using this machine
• People with metal implants should not use this machine.
8
POWERDUCTION 10R
EN