Lanaform Aroma Manual De Instrucciones página 2

INSTRUCTION MANUAL
EN
Thank you for purchasing Aroma from LANAFORM.
Thanks to its fan system, the device permits the diffusion of a scented cold vapour. This vapour is typified by a
gentle perfumed mist dispensed via the diffuser.
PLEASE READ ALL THE INSTRUCTIONS BEFORE USING YOUR DIFFUSER, ESPECIALLY THESE FEW BASIC
SAFETY INSTRUCTIONS:
• Always stand the Aroma on a hard, flat and level surface, slightly away from walls and sources of heat such
as stoves, radiators, etc. (If you don't place it on a level surface, the Aroma may not work correctly).
• Check that the voltage of your electricity supply corresponds to that of the device.
• Do not plug the Aroma in or unplug it with wet hands.
• Never completely dismantle the device.
• If the power supply cord is damaged it must be replaced by a special or similar cord available from your
supplier or his after sales service department.
• Don't leave the diffuser in the sun for long periods.
• Unplug the device before cleaning it or removing the reservoir.
• Don't switch the diffuser on when there is no water in the reservoir.
• Never scratch the transducer with a hard tool; please refer to the cleaning instructions.
• Don't wash the complete unit in water and don't submerge it.
• The Aroma must be cleaned regularly. To do this, please refer to the cleaning instructions in this manual.
• This device is not designed to be used by people, including children, whose physical, sensory or mental
capacities are not fully developed, or people who lack the experience or knowledge to use it properly
unless they are monitored by someone who is responsible for their safety or they are able to follow prior
instructions concerning the use of the device. Children should be watched to ensure they do not play with
the device.
COMPONENTS
1 - Blue mood light
2 - Nozzles
3 - Reservoir
4 - Folding cover
5 - Indicator lights (on/off/30sec)
6 - Base
7 - Transducer
8 - Maximum water level
9 - Base reservoir
10 - Water level check
11 - Transformer connection
12 - Stopper
2