Device Installation - Lechange F Serie Guia De Inicio Rapido

Step 3 The green light of camera will stop flashing if pairing succeeds; the red light
will flash for 10s and then disappear if pairing fails.
Method 2
Scan the QR code on the device with Lechange app, and then follow app guide to
operate.
5

Device Installation

Note
Before installation, please make sure the installation environments can at least
support 3x weight of the device.To install the device, do the following.
Step 1 Drill holes on the wall and install the
expansion bolts into the drilled holes.
Step 2 Fix the installation board with screws
onto the wall.
Step 3 Spin the device to get locked onto the
installation board.
Disclaimer
- This quick start guide is for reference only.
Minor difference might be found in user interface.
- All the designs and software here are subject to change without prior written
notice.
- All trademarks and registered trademarks mentioned are the properties of their
respective owners.
- Please visit our website or contact your local service engineer for more
information.If there is any uncertainty or controversy, please refer to our final
explanation.
4