Hammerhead HCSD040 Manual Del Usario página 16

OPERATING INSTRUCTIONS
6. Screw Driving
a. Install a suitable bit.
NOTICE: Always use the correct
type and size of screwdriver bit for
your fastener.
b. Grasp only the handle of the
tool only and align the bit
perpendicular to the screw.
c. Apply just enough pressure to
keep the bit engaged on the
screw.
d. To tighten a screw, rotate
the forward/reverse selector
clockwise.
e. To loosen a screw, rotate the forward/reverse selector counterclockwise.
16
6
4V ELECTRICIAN'S SCREWDRIVER