SYNCHRONIZING THE COUNTER HANDS
If a counter hand does not return to zero as normal (following a battery change or
inappropriate handling), proceed as follows:
1. Pull the crown out to position 2; wait one second.
2. Press pushpiece A; the tenth-of-a-second counter hand (4)
makes one full turn.
– Press pushpiece B until the hand returns to its initial
position.
3. Press pushpiece A, the seconds hand (3) makes one full
turn.
– Press pushpiece B until the hand returns to its initial position.
4. Press pushpiece A, the minutes hand (2) makes one full turn.
– Press pushpiece B until the hand returns to its initial position.
5. Press pushpiece A, the hours counter hand (1) makes one full turn.
– Press pushpiece B until the hand returns to its initial position.
6. Push the crown back into position 1.
22
SPECIAL CHARACTERISTICS
1
/
th
100
Your Breitling chronometer is equipped with a scale dividing the hour into
hundredths,thus making it easier to read off the minutes on a decimal base.
A
E.g.: 0.6h = 36 minutes
2
B
H DIAL
23