Pinnacle Products International Master SSR-822R-IHR Manual Del Usuario E Instrucciones De Operación página 6

Mounting:
building the Support pole
1. Attach the bottom pole section to the base
with three (3) 10mm bolts and three (3) nuts.
(See Figure 3)
2. Slide flange cover over pole and onto base.
(See Figure 3)
Bottom Pole
Base
Figure 3
3. Connect top pole to bottom pole using built in
threads. (See Figure 4)
Bottom Pole
Figure 4
Setting Support pole Height
1. To change the support pole height, rotate
the locking ring COUNTER-CLOCKWISE to
unlock pole.
NOTE: be certain to keep a firm grip on the
pole while unlocked! The heater will slide
down to its lowest point it is not held and
slowly moved to a desired position.
2. Raise or lower post to desired position.
3. Rotate locking ring CLOCKWISE to lock post
and tighten firmly.
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
Assembly
Attaching Heater to Wall Mount
1. The tilting heater support bracket is attached
2. Attach heater support bracket to the pole
Flange Cover
Top Pole
Figure 5
NOTE: The mounting bracket and pole are
designed to support the weight of the heater
only. DO NOT hang any object other than the
heater from the mounting bracket or support
pole.
Using The Tilting Support bracket
1. Loosen the tilting support bracket using the
2. Position the tilting support bracket at the
3. Secure the tilting head bracket by tightening
5
to the heater body with one knob screw.
stand using one (1) 10mm bolt. (Figure 5)
Heater Head
Assembly
Top Pole
knob screw.
desired angle.
the knob screw.
Halogen Infrared Heater User's Manual
10mm Biolt