Publicidad
STEP 8
FRAMELESS APPLICATION
Note: Regardless of system holes
or not, if you have a frameless
cabinet opening of 16.5" then
you MUST use the 1/8" Blum
spacers. If you have a frameless
cabinet opening of 16.75" then
you must use the 1/4" Blum
spacers.
Based on the min cabinet opening,
select the Blum spacers that
correlate with the opening. Attach
(2) of the Blum spacers to the left
slide. Attach one spacer in the first
hole and the other spacer 5th hole
(See Figure H-1).
Attach (2) of the Blum spacers to
the right slide. Attach one spacer
in the first hole and the other
spacer in the last hole
(See Figure H-2).
Use the dimensions on the image
for proper placement of the
frameless slide set. Secure the
slide set to the cabinet by using
(4) #8 x 5/8" wood screws
(See Figure H-3).
Note: All measurements are from
the center of the hole to the
front edge of the cabinet.
#2
FOR FACE FRAME AND
FRAMELESS APPLICATIONS
STEP 9
Attach the cable carrier arm to the
large bracket that is secured to
the left Blum slide by disengaging
the locking mechanism, inserting
the plungers, and re-engaging the
locking mechanism (See Figure J).
Slide the drawer onto the slides,
lock the slides onto the triggers,
and cycle a few times.
4
FIG. H-1
Edge of cabinet
13/32"
1st
FIG. H-2
Last
FIG. J
Customer Service: 800-626-1126 | rev-a-shelf.com
Left Slide
9-15/32"
5th
Right Slide
17-27/32"
13/32"
Edge of cabinet
1st
Plungers
Publicidad
