Publicidad
STEP 10
Attach the drawer front using the
figure 8 mounting brackets and
the screws that come in the same
bag. The unit can now be plugged
in (See Figure K).
DISENGAGING THE VANITY
OUTLET ORGANIZER
Step 1:
Unplug the organizer from the
outlet that is installed in the
cabinet.
Step 2:
Disengage the two black plungers
that are attached to the arm in the
back of the unit. Achieve this by
pulling out the two plungers. You
will feel them disengage
(See Figure L).
Step 3:
Remove drawer by releasing the
(2) Blum triggers that are on the
bottom of the drawer
(See Figure M).
FIG. K
FIG. L
IMPORTANT SAFETY INSTRUCTIONS
Caution: To reduce risk of fire or electronic shock or injury to persons:
- Not intended to be used in damp locations. Dry locations only
- Not intended for long term storage. Items should be monitored.
- Drawer should be removed and plastic ties inspected to insure they are secure at least twice a year
- Route and secure cords so that they will not be pinched or damaged when drawer is closed.
- A licensed electrician should be consulted for wiring through ceiling, soffits or walls. All wiring must follow NEC regulations.
- Do not store combustibles in drawer (i.e. aerosols)
- Do not alter the plug or plug cover
Customer's responsibility:
- Install 120v outlet in rear of cabinet within 10" of bottom of drawer.
- Do not overload outlet.
- Wood is combustible. Do not put/leave hot items in the bottom of
the drawer. Only place hot items in the (2) silver cans.
- Customer is responsible for wiring and connecting plug in cabinet.
- Do not leave hot items unattended while on in the drawer.
- Turn off hot items not in use in the drawer.
INSTALLATION INSTRUCTIONS: VANITY OUTLET ORGANIZER
FIG. M
Plungers
Product intention of use:
- Product is intended for vanity electronic device usage.
- Overall safety of this product is determined by its end use.
5
Publicidad
