KTM 60712929000 Manual Del Usario página 14

14
- Position sliding plate (scope of supply).
- Fit bolts with sliding bushings, rubber washers and washers from
assembly kit (scope of supply) and tighten to 25 Nm.
Mounting the Top Case
- Key position: 45° to the right
The carry handle pops up automatically.
- Swivel out locking lever .
- Position Top Case (scope of supply) in the guides of guide plate
and push forward until it is fi rmly seated on the guide plate.
- Swivel in locking lever .
- Press carry handle all the way down and turn key back to upwards
position and remove.
NOTE
If it is impossible to swivel in the locking lever, the Top Case is not
yet engaged in the correct position or the key is not in the right
position.
.