Removing The Stand; Affixing The Rubber Feet To The Drive Case - Toshiba StorE Alu Guia Del Usuario

Do not discard the stand. Your Drive's Model and Serial numbers
may be printed on the label affixed to the underside of the stand.

Removing the stand

Use a screw driver with the proper type and size head to loosen
the two screws located on the underside of the stand. Loosen the
screws just enough so that you can easily slide the stand out of
the groove. Keep the nuts attached to the screws. Store the stand
in a safe place.
Affixing the rubber feet to the
Drive case
It is highly recommended you use
the supplied rubber feet for
horizontal placement and
stacking of Drives. The
feet help keep the Drive
securely in place, and they
also prevent the Drive case
from possibly scuffing your
desktop.
18