Ms Semenstorage; Recommendations; Installation Of The Ms Semenstorage - MS Schippers 4508420 Manual

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26

MS Semenstorage

The 112 litre MS Semenstorage is especially designed for the storage of diluted semen at 17°C. It
has built-in heating, cooling and air stirring, which keeps the internal temperature constant at
17°C, in all ambient temperatures between
-10°C and +35°C.

Recommendations

Always transport the MS Semenstorage vertically.
Avoid shocks during transport.
When the MS Semenstorage is not in use, turn it off, this will save electricity.
Do not place the MS Semenstorage in direct sun light: this will cause unnecessary energy
consumption.
Do not place the MS Semenstorage in animal housing, because of the corrosive
atmosphere.
Always check the temperature, using the door mounted thermometer, before you put the
MS Semenstorage into use.
Do not over stock the MS Semenstorage: packs should be laid flat on the shelves.
Do not place product up against the rear of the MS Semenstorage.
There are no user serviceable parts. In case of problems, always contact your supplier.

Installation of the MS Semenstorage

Place the MS Semenstorage on a flat, dry, horizontal surface in a dust-free environment.
At least 150mm free space should be allowed either side of the MS Semenstorage to allow
air circulation
Do not turn on for the first 24 hours following transport!
Plug into a standard 230V13A mains socket.
Depending on the ambient temperature the MS Semenstorage will take time to reach the
set temperature.
The door mounted thermometer is ballasted to represent the true product temperature. If
using a calibrated thermometer then small variations in internal air temperature are
normal.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido