Troubleshooting - GERATHERM micromesh GT-7002 Instrucciones De Uso

Troubleshooting

What
happened
The indicator
turns red.
The device
does not work
when it is
turned on
The indicator
is green but
no aerosolis
produced or
the delivery is
slower than
usual.
GB
There is
medication in
the medication
cup and the
ON/OFF but-
ton has been
pressed, but
no aerosols
are being
produced.
Causation
The batteries have
run out of power.
The mesh cap is
dirty.
No power.
The medication cup
is empty.
The mesh cap is
broken.
The medication cup
or the mesh cap
is dirty.
No power supply.
The mesh is
covered with liquid.
38
Correction
Replace the bat-
teries.
Clean the mesh
cap. If the
problem persists,
please replace
with a new mesh
cap.
Check the batter-
ies and replace
them if neces-
sary. Pay atten-
tion to polarity.
Fill medication
cup and turn on
the nebulizer.
Replace with a
new mesh cap.
Clean those parts
or replace mesh
cap.
Check the batter-
ies and replace
them if neces-
sary. Pay atten-
tion to polarity.
Check if the
mesh cap is cov-
ered with liquid. If
yes, shake off the
liquid and then
try again.