melitta cremio Instruciones De Uso página 6

be exceeded. If this maximum
filling level is exceeded hot milk
could overflow and cause burns
or scalding. Max. filling level for
frothed milk: 150 ml, Max. filling
GB level for warm milk: 250 ml (see
level indicators on appliance).
• Only use the milk frother to
prepare hot / cold frothed milk
or to heat milk, do not use to
heat other liquids.
• Avoid contact between milk /
water and the power cable and
power connections.
• Do not use the milk frother
without the lid. Do not open
the lid during use.
• Never touch the appliance with
wet hands or feet.
• The inside of the milk frother
gets very hot and remains hot
for some time after use because
of the heating element in it.
Avoid contact with the inside of
the milk frother.
• Never immerse the appliance in
water.
• Do not clean parts which come
into contact with water or cof-
fee (e.g. water tank, filter, cof-
fee pot) with abrasive cleaning
materials or scouring cream.
Remove detergent residues
with clean water.
• Please note the cleaning and
care information at point 4.
• The appliance should be discon-
nected from the power supply
when it is left unsupervised
or before being assembled or
disassembled, or when cleaning.
• Do not use the appliance if the
8
power cable is damaged.
• This appliance can be used by
children who are 8 years old
or over, if they are supervised
or have been instructed in the
safe use of the appliance and
have understood the dangers
associated with it. Cleaning and
maintenance of the appliance
should not be undertaken by
children unless they are 8 years
old or over and are supervised.
The appliance and power cable
should be kept away from children
under 8 years old.
• The appliance can be used by
people with limited physical,
sensory or mental aptitude, or
who have limited experience
or knowledge, if they are su-
pervised or instructed in how
to use the appliance safely and
have understood the dangers
involved in using it.
• Children must not play with the
appliance.
• Replacement of the power cable
and all other repairs should
only be carried out by Melitta
Customer Service personnel.
2. Before first use
• Ensure that the power supply in your home corresponds
to that on the model plate on the base of the appliance.
• Connect the appliance to a power source.
• All appliances have been tested during production
to ensure they work perfectly. Before using the
appliance for the first time you should rinse the milk
container, the lid and the whisk with hot water then
dry thoroughly.
3. Froth or heat milk
• Ensure that the appliance is connected to the power
source.
• Use the button to raise the lid .
• Pour the desired amount of milk into the container.
Pay attention to the min. and max. filling levels on
the container  as frothed milk expands and can
®