melitta CREMIO Manual De Instrucciones página 18

Preparing milk froth
Open the lid by turning it anti-clockwise (
•
remove it.
Screw the milk froth attachment (
•
frothing rod.
Pour the desired amount of milk into the container.
•
Pay attention to the min. and max. filling levels on the con-
tainer (Fig. C). Fill in at least 100 ml and at most 200 ml
of milk. Frothed milk expands and will overflow if it is filled
above the max. level.
Place the lid on the container and turn it clockwise
•
(Fig. D) as far as possible. The closed lid must be aligned
with the handle.
Press the
•
warm milk froth.
Press the
•
cold milk froth.
→
→
Note
Keep the lid closed during preparation. Press the
again or remove the appliance from the station to stop the
preparation manually.
Turn the lid anti-clockwise (
•
Pour the milk froth in your cup or spoon it carefully out of
•
the container, without damaging the non-stick coating.
Clean the Melitta
•
16
button (Fig. A, No. 6), if you want to prepare
button (Fig. A, No. 7), if you want to prepare
The indicator light on the respective button is illuminated.
The milk froth preparation starts.
The preparation stops automatically. The motor stops and
the indicator light on the button turns off.
Cremio (see page 18).
®
Fig. B) and
Fig. A, No. 3) onto the
Fig. B) and remove it.
button or