DOMENA SILVER PRO TA 500 Instrucciones De Uso página 10

Setting-up the ironing board
A1. Place the ironing board upright, the pointed
end downwards.
A2. With your right foot, block the wheels to
prevent the ironing board from sliding and
hold the latter with your left hand.
A3. With your right hand, press down on the legs
until the required height is reached.
A4. To adjust the height of the ironing board, first
place it upright and fold it away.
Folding the ironing board away
B1. Put your left foot in front of the wheels.
B2. With your right hand, tilt the ironing board, its
pointed end downwards until the legs on the
floor are upright.
B3. With your left hand, press down on the
height adjusting handle and tilt the ironing
board so that the legs fold away.
B4. Place the pointed end of the ironing board
on the floor, it stands upright on its own.
C. Warning: never fold or unfold the ironing
board in a horizontal position.
Switching it on
❏
1
Plug the appliance in.
❏
2
Put the on/off button to the 'on' position.
The button lights up indicating that the
ironing board and the heated tabletop are
powered up.
When using your toyal ironing board,
particularly when the ventilator is switched
off, the underneath of the metal tabletop
could become very hot especially at the
pointed end. For your own safety, avoid
touching it.
Remember: whenever you temporarily stop
ironing do not forget to put the on/off button to
the 'off' position.
❏
3
Place your steam system or standard iron
on the iron rest and plug it into the electric
socket on the ironing board. Switch on your
steam system or standard iron.
6
❏
4
Attaching the iron rest
To attach the iron rest to the underside of the tabletop.
A Ensure that the two clamping levers are fully undone
then slide the iron rest into the metal supports.
B Fully tighten the two clamping levers.
Fitting the cover
- Once the foam has been laid out, stretch the
elasticated cover over the tabletop ensuring that it is
properly aligned and that there are no creases.
- The cover is machine washable at 40°C.
How to use the suction or blowing
mode
- Ensure that the on/off button of the tabletop is
illuminated.
The suction and blowing modes are controlled from
the pedal.
- Press your foot down on the pedal as and when
needed.
❏
5
Suction mode: the select button facing
downwards.
The suction function creates a flow of air that
accelerates the extraction of the dampness generated
by the steam. The clothing is perfectly dry and can be
immediately put away.
With the suction, the clothes are held firmly against the
ironing board. This eases the ironing of thicker
materials and the pressing of pleats and creases
(trousers, pleated skirts...).
❏
6
Blowing mode: the select button facing upwards.
The blowing function creates an air cushion that allows
delicate textiles, sensitive to heat, to be ironed.
Stretched out over the air cushion, blouses, shirts,
linings, trouser tops and other delicate items of clothing
are gently ironed without any creasing.
By using the blowing mode, the clothes no longer come
into contact with the soleplate of the iron, hence there
is no creasing, hot iron marks or stitching imprints.
Storing the ironing board
- After ironing, you can cool the table-top down
quicker by running the suction mode for a few
minutes.
- Switch your total ironing board off and unplug it.
- Leave the appliance to cool down before folding it
away (see 'folding the ironing board away').