Stanley Fat Max PB2 Manual De Instrucciones página 2

SAFETY AND
CERTIFICATIONS
Working safely with this instrument
is possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly
followed.
Do not remove the label on the side
of the housing.
The use in combination with other
optical instruments, manipulations
or use in other applications other
than described here, can lead to
dangerous laser outputs.
Do not stare into the laser beam.
Do not direct the laser beam at
other persons. Check the beam
path over a relatively long distance
and take the necessary
precautions.
This laser complies with all
applicable portions of title 21 of the
Code of Federal Regulations set by
the Dept. of Health, Education, and
Welfare, the Food and Drug
Administration, the Center for
Devices, and the Bureau of
Radiological Health.
2 • PB2
5
4
The PB2 has also been tested and
complies with the CE certification
requirements set forth in the EC regu-
lations 89/336/EEC and EN 61000-6-1
(EN50082-1), EN 61000-6-3 (EN50081-1)
and IEC 60-825-1.
1
2
3