HAMPTON BAY 216-665 Manual De Instrucciones página 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1ea Canopy (#1) 1ea Screw
Collar Loop (#2)
1ea Loop (#5) 1ea Nipple A (#8)
1ea Bottom Cover (#12) 1ea Finial (#13)
ASSEMBLY INSTRUCTIONS:
1.
Carefully unpack the fixture. Lay out all parts on a clean surface.
2.
Attach Column A to Column B by screwing Nipple C onto Bushing A. Screw Nipple A
(#8) into Bushing B.
3.
Insert the Plug from Column B into the Slot on the Fixture Body (#9). To prevent
electric shock, match the wide blade of Plug to the wide Slot. Place the Fixture Body
(#9) and then the Washer (#10) over Nipple A (#8). Screw the Hex Nut (#11) onto Nipple
A (#8) to secure it. Place the Bottom Cover (#12) around Nipple A (#8). Secure the
Bottom Cover (#12) by screwing the Finial (#13) to Nipple A (#8).
4. Weave the fixture wires up through the Loop (#5), through the Chain (#25), through the
Screw Collar Loop (#2), through the Ring (#4), through the Canopy (#1) and through the
Nipple (#23) on the Mounting Strap (#22) [as shown on Page 7].
5. Unscrew the Socket Rings (#15) from the Sockets (#17). Place the Shades (#16) over the
Sockets (#17). Screw the Socket Rings (#15) onto the Sockets (#17) to secure the Shades
(#16).
6. Install three 60 watt medium base incandescent light Bulbs (#14) or three equivalent
compact fluorescent light bulbs (neither included) in the Sockets (#17).
Page 4
5 feet Chain (#25)
1ea Washer (#10)
3ea Socket Rings ( 15) 3ea Shades (#16) 1ea Quick Link (#3)
ASSEMBLAGE:
1ea Ring (#4)
1ea Hex Nut (#11)
Page 21