RCA RSWW1 Guia De Instalacion página 13

Step 5: Set up the sensor and control unit
A. Connect the first smart module lead to the control box lead
Smart
Module
Servo
How to connect leads
NOTE: The Smart Module is
Optional
Control
Box The Smart Module is what allows
the hot water heater shut-off system
to send notifications to your phone,
but the system can be used without
it as well. Simply connect the first
control box lead directly to the shut-
off valve, as shown here. Then skip to step D on page 15.
1. Line up the round and square plugs on each lead to the corresponding round and
square holes on the lead you're trying to connect to.
2. Snap both pairs of leads into place.
Control
Box
Servo
13