Accessories; Contents Of Cd-Rom; Installation Overview - Baby Lock Enterprise BNT10-U Guia De Instalacion

Accessories

The following items are included with your purchase.
Please verify all contents and if anything is missing or
damaged, contact your authorized Baby Lock retailer.
• CD-ROM (For details regarding contents, refer to
the following.)
• Installation Guide (this guide)
In addition, this kit contains sheets of embroidery
positioning stickers. These are necessary for using the
pattern connecting function. Refer to the Instruction
and Reference Guide for use.
• Embroidery positioning sticker sheets
Note
• For details on proper use of the included
accessories see the Instruction and Reference
Guide viewable from the disc by clicking on the
"manual" folder and selecting your preferred
language.
You may also view the Instruction and Reference
Guide by clicking on the "manual_index.pdf" icon
contained within the disc and selecting your
preferred language.

Contents of CD-ROM

• Certification Key Issuing Wizard
• Enterprise™ Embroidery Upgrade
and Reference Guide (PDF)
* Adobe Reader is required for viewing and printing the
Instruction and Reference Guide.
• Upgrade application for KIT
Note
• Upgrade application data is contained in the
"BNT10_BNT10L" folder.
2

Installation Overview

First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a Certification Key. Then,
use the Certification key within the Settings screen,
page 6, to activate the upgrade application for KIT
the embroidery machine.
In the procedures section,
performed with the embroidery machine and
indicates operations performed with the computer.
I Instruction
I
indicates operations
[Step 1] Make a note of the internal
machine identification number (No.).
[Step 2] Insert the CD-ROM into the
computer's CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard instructions
for obtaining the Certification Key.
[Step 4] Install the upgrade application
for KIT I on the embroidery machine.
[Step 5] Remove the USB media, and
turn the machine off and then on again.
[Step 6] After the upgrade has been
successfully installed, certify the "KIT
in the Settings screen of the embroidery
machine.
I on
I "