Outdoor Antenna Connections; Viewing Angle Adjustment - memorex MLT1912 Guia Del Usuario

OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED)
Follow the instructions for the type of antenna system you intend to use.
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the
combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300
ohm twin-lead wire, use a 300-75 ohm
matching transformer (NOT SUPPLIED).
RECEIVING ATSC CHANNELS
You can connect to an outdoor antenna to receive the free ATSC digital channels.
The size of the antenna you will need will depend on how far away the television station broadcast
antennas are from you. The further the distance the larger the antenna you need. If your unsure of how
far you are you can go to http://www.antennaweb.org and put in your zip code to search their database
for your distance and the direction of the broadcast antennas. If you're fairly close you may be able to
get away with just a small antenna that will sit on top of your TV set. If you need a larger antenna you
can either put one in the attic or outside on an antenna mast.
This unit is designed to allow you to have a comfortable viewing angle, which can be adjusted by slightly rotating the monitor
to the front or rear.

OUTDOOR ANTENNA CONNECTIONS

Combination VHF/UHF
Antenna (Separate VHF and
UHF 300 ohm twin-leads)
Connect the UHF twin-lead wire to a
combiner (NOT SUPPLIED). Connect
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT SUPPLIED).
Attach the transformer to the combiner.
Attach the combiner to the antenna jack.

VIEWING ANGLE ADJUSTMENT

Separate VHF/UHF Antennas
Connect the 75 ohm cable from the VHF
antenna and the UHF antenna twin-lead
wire to a combiner (NOT SUPPLIED).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-
9
lead wire use a 300-75 ohm
matching transformer,
connect the transformer to the
combiner.
NOTE: Do not force the LCD
monitor over its maximum viewing
angle settings. Attempting this will
result in damage to the monitor
and stand.
then