WRX-843 MODULAR LINE-ARRAY
SPEAKER SYSTEM
BATTERY SAFETY
1. Keep conductive objects such as keys, jewelry or
other materials away from the battery terminals.
Failure to do so may result in the battery being
short-circuited, which could lead to injury or
burns.
2. Never reverse the polarity of the battery
contacts.
3. Keep the battery away from excessive heat
and direct sunlight. Do not place it on or in
heating appliances, such as microwave ovens or
radiators. Batteries can explode if overheated.
4. Do not attempt to alter or modify the battery,
to insert foreign materials into the battery or to
immerse it in or bring it into contact with water
or any other liquid. Failure to do so could lead to
a fire, explosion or other dangerous situations.
5. In the event of leakage of battery acid, ensure
that it does not come into contact with skin or
eyes. If this occurs, rinse immediately with clean
water and consult a doctor.
6. In the event of the battery becoming deformed,
overheating or changing color during charging
or storage, refrain from using the device
immediately and remove the battery. Further
use of the device could lead to leakage of
battery acid or may cause a fire or an explosion.
7. Do not put batteries into a fire because they
may explode. Damaged batteries may also
explode.
8. Dispose of used batteries in accordance
with local regulations. Improper use of the
battery can cause a fire, an explosion or other
dangerous situations.
9. Do not allow children or pets to chew or suck
on the battery. This could lead to damage or an
explosion.
10. Do not strike, puncture or place the battery
under high pressure. Otherwise this could lead
to a short circuit or overheating.
11. Do not drop the device or battery. If the device
or battery is dropped, especially onto a hard
surface, either or both could be damaged.
12. If the standby time of the device is significantly
reduced, replace the battery.
13. If the device has a built-in, non-removable
battery, do not attempt to remove the battery,
because this could cause damage to the device.
Take the device to an authorized service center
for replacement of the battery.
IMPORTANT: Charge the battery only with the
dedicated charging system.
SPECIFICATIONS
ACOUSTIC PERFORMANCE
Frequency Response
Max Peak SPL (@1m)
Crossover Point
Dispersion
Input Impedance
HIGH FREQUENCY SECTION
Type
Size
Cone Material
Magnet Size
Magnet Material
LOW FREQUENCY SECTION
Type
Size
Magnet Size
Magnet Material
Voice Coil Diameter
AMPLIFIER PERFORMANCE SYSTEM
Rated Power RMS
Rated Power Peak
THD
Type
Line Input Gain
Mic Input Gain
Cooling
POWER
Type of line cord
Voltage
Voltage
DIMENSIONS PACKAGED
Dimensions (H×W×D)
Weight
DIMENSIONS
Dimensions (H×W×D)
Weight
7
35Hz-20KHz
Better Than 103dB
200Hz
120°×20°
4 ohms
Mini line-array
6 x 2.75"
Glass Fiber
1"
Neodymium
System Subwoofer
8"
40 OZ
Ferrite
2"
600W (RMS)
3000W (Peak)
0.5% + 0.03%
Class D + Class AB
-6dB
-60dB
Speed regulated fan
US TYPE PLUG
110V-120V 60HZ
220V-240V 50HZ
610×520×415mm
24×24.47×16.33 inch
13.5 Kg. / 29.76 Lbs
1980×320×300mm
77.95×12.6×11.8 inch
11 Kg. / 24.25 Lbs