Getting Started; Radio On-Off/Volume Control; Channel Number; Selecting A Radio Channel - Motorola GP360 Guia Basica Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

GETTING STARTED

Radio On-Off/Volume Control

To turn the radio on, turn the On-Off/Volume Control
knob clockwise. To turn the radio off, turn the
On-Off/Volume Control knob counterclockwise until
you hear a click.
At power up the radio will display a message
customised by your dealer,:
Radio On
After this text has been displayed, the radio perform
a self test routine. On completion of a successful
self test the radio will display:

Channel Number

This may be a number or an alias and will be the
channel currently selected by the rotary channel
selector. Alternatively, if required the radio may
display a message customised by your dealer. e.g.
Ready

Selecting a Radio Channel

Turn the channel selector rotary knob clockwise or
counterclockwise until you reach the desired
channel indicated on the display.
English
8

Sending a Call

1.
Select the desired channel.
2.
Press the PTT button and speak clearly into the
microphone.
Your mouth should be 2.5 to 5 cm away from
the microphone.
3.
Release the PTT button when you finish
speaking.
Note:The system may have a limited call time and
the call may be terminated automatically if this
call time is exceeded.

Receiving a Call

1.
Turn your radio on and adjust the volume level.
2.
Switch to the desired channel.
3.
If, at any time, a call is received you will hear
the call at the volume level you have set.
Cancelling/Ending a Call
To terminate a call at any time press the Monitor/
Call Cancel button. Always end a call by pressing
the Monitor/Call Cancel button.

Publicidad

Tabla de contenido
loading

Tabla de contenido