Prior Information - CICSA Zeta ANEXO TEC+ ZT Manual De Funcionamiento

Towel radiator models ZT, ZX, PUKITA, TUBON, DIJON, CUADRO, KARNAK, VERONA and ELFIE
programmes, the schedules will be modified for
all the days of the week for which P1, P2 or P3 had
been set.
1 - If you just set the time and day, go to step 2.
From Auto, Comfort, Eco or Frost protection
mode, press for 5 seconds. When the cursor
moves above the setting time symbol
press shortly.
1
5 sec.
2 - Press o .The cursor moves above
1 1 1 1 1 1 1 1 1 1 1 1 1
3 - With or , select
Press for 5 seconds to make changes.
1 1 1 1 1 1 1 1 1 1 1 1
1
4 - The start time (which by default is 06:00)
will flash. Using or
this time, by increments of 30 minutes. Save by
pressing .
1
5 - The
will flash. Using
time, by increments of 30 minutes. Save by pressing
,
6 - Press
return to
NOTE: without action on the keys, it will return to
CHOICES AND ALLOCATION PROGRAMMES
.
1 - If you just set the time and day, the cursor
moves automatically under
From Auto, Comfort, Eco or Frost protection
mode, then press
cursor positionned under the set time symbol

PRIOR INFORMATION

. P1 will flash.
Correspondence days / numbers:
2
The days of the week will scroll on display with
5 sec.
the programmes that you set for them, meaning
Comfort "COnF" every day.
you can change
2
end time (which by default is 22:00)
or
.
1
to exit the programming Mode and
.
after a few minutes.
. for 5 seconds. When the
, press again.
Display Area:
2
M T W T
1 2 3 4
1 1 1 1 1 1 1 1 1 1 1 1 1
English - User guide TEC+
you can change this
2
.
F S S
5 6 7
15