Conceptronic C300APRA2 Guía De Instalación Rápida página 45

Note: In the picture below you will see an example of a Virtual Server configuration.
E. Select a "Rule Index" that is not in use. You can check this in the Virtual Server Listing.
F. Enter a name for your Virtual Server Rule in the "Application" field.
G. Select the Protocol for your Virtual Server rule: "TCP", "UDP" or "ALL".
Note: If you do not know which protocol you need for your Virtual Server Rule, select "ALL". This
option will pass both TCP and UDP traffic to the configured IP address of your computer/server.
H. Enter the Start and End Port Number for the Virtual Server Rule.
I. Enter the IP address of your computer/server which needs the Virtual Server Rule.
J. Click on "SAVE" to create and save the Virtual Server Rule.
When the Virtual Server Rule is saved, it will be shown in the "Virtual Server Listing".
To create more Virtual Server Rules repeat steps E to J.
The defined Virtual Server rules are ready to use!
ENGLISH
45