General Safety Rules - Ryobi RLT30CD Manual De Utilización

GB
F D E
NAME
Switch
Thank you for buying a Ryobi trimmer.
Your new trimmer has been engineered and manu-
factured to Ryobiʼs high standard for dependability, ease
of operation, and operator safety. Properly cared for, it will
give you years of rugged, trouble-free performance.
WARNING
To reduce the risk of injury, the user must read
and understand the operatorʼs manual.
WARNING
Do not attempt to operate this trimmer until you
have read thoroughly and understood completely
all instructions, safety rules etc contained in
this manual. Failure to comply may result in
accidents involving fire, electric shock or serious
personal injury. Save operatorʼs manual and
review frequently for continuing safe operation,
and instructing others who may use this tool.
READ ALL INSTRUCTIONS.

GENERAL SAFETY RULES

For safe operation, read and understand all
■
instructions before using the trimmer. Follow all safety
instructions. Failure to follow all safety instructions
listed below, can result in serious personal injury.
Do not allow children or untrained individuals to use
■
this unit.
Never start or run the engine in a closed or poorly
■
ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all
■
objects such as rocks, broken glass, nails, wire,
or string which can be thrown or become entangled in
the bump head.
Wear full eye and hearing protection while operating
■
this unit.
Wear heavy long pants, boots, and gloves. Do not
■
wear loose fitting clothing, short pants, jewellery of
any kind, or use with bare feet.
Secure long hair so it is above shoulder level to
■
prevent entanglement in any moving parts.
Keep all bystanders, children, and pets at least 15 m
■
I P NL S DK N FIN GR HU CZ RU
English
EXPLANATION
On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU where
the product is purchased.
away.
Do not operate this unit when you are tired, ill, or
■
under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
■
Keep firm footing and balance. Do not overreach.
■
Overreaching can result in loss of balance or
exposure to hot surfaces.
Keep all parts of your body away from any moving part.
■
Do not touch area around the muffler or cylinder of
■
the trimmer, these parts get hot from operation.
Always stop the engine and remove the spark plug
■
wire before making any adjustments or repairs except
for carburetor adjustments.
Inspect the unit before each use for loose fasteners,
■
fuel leaks, etc. Replace any damaged parts before use.
The string head will rotate during carburetor
■
adjustments.
It has been reported that vibrations from hand-held
■
tools may contribute to a condition called Raynaudʼs
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the
fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness,
diet, smoking and work practices are all thought to
contribute to the development of these symptoms.
It is presently unknown what, if any, vibrations or extent
of exposure may contribute to the condition. There are
measures that can be taken by the operator to possibly
reduce the effects of vibration:
a) Keep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is
a major factor contributing to Raynaudʼs Syndrome.
b) After each period of operation, exercise to increase
blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician
about these symptoms.
Keep the tool well maintained, fasteners tightened
■
and worn parts replaced.
Mix and store fuel in a container approved for fuel.
■
10 10
RO PL SLO HR TR EST LT LV SK BG