Publicidad
Idiomas disponibles
Idiomas disponibles
9 -RESET MODO SOFTWARE/
Reset:
This procedure should only be done in case of reconfiguration of the lock.
Note:
In case the reader is installed below the handle no blue light flashes , should be considered
programming time.
1-
Remove the battery cover.
3-
Press S1 button and maintain.
5-
After 5 blue lights or 5 seconds release
S1 button
IN.20.602.30
7-
Re-assemble the battery cover and reader.
The lock is ready to be programed again
CHECK SOFTWARE
Manual de instalação / Installation Manual / N
2-
Disassemble the reader
2
4-
Connect external power supply
S1
IN.20.602.30
6-
emits blue light confirmation.
3x BLUE
IN.20.602.30
otice d'instructions /
Manual de instalación -
1
3
MI190-0
EN
4
www.jnf.pt
21/ 32
Publicidad
