Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction and
you may see error code "H99". Please consult
authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fin, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH 7) or neutral household
detergent.
• Do not use water hotter than 40°C / 104°F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be clean
for at least every 6 months by
authorised dealer.
Front panel
Wash gently and dry.
Remove the front panel
2 Pull out and lift up
1 Release the
hooks at
both ends
Close it securely
3 Close down
4 Press both ends and center of the front panel
14
ACXF55-04390_YC0517-1.indb 14
ACXF55-04390_YC0517-1.indb 14
2 Push in
1 Insert
at both
sides
Indoor unit
Front panel
Air filters
Air filters
Once every 2 weeks
• Wash/rinse the filters gently
with water to avoid damage to
the filter surface.
• Dry the filters thoroughly under shade, away
from fire or direct sunlight.
• Replace any damaged filters.
Remove air filter
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL
operation. After 15 minutes of operation, it
is normal to have the following temperature
difference between air inlet and air outlet
vents:
COOL: ≥8 °C / 14.4 °F
For extended non-use
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Aluminium fin
Attach air filter
Insert into the unit
6/2/2017 2:52:54 PM
6/2/2017 2:52:54 PM