Installation; Operation - Omcan Santos 28 Manual Del Suaurio

Installation

hand.
4. Place the cover (2) on the bowl (4), turn the cover to engage the 2 lugs in the catches on the locking rods
(Fig. 10).
5. Rotate the clamping handle (1) by one half turn to block and lock the cover in place (2) (Fig. 5).
6. Place the fruit plunger (3) in the cover feed channel (2) (Fig. 11).
7. Position the pulp container (6) correctly relative to the outlet of the discharge channel (16).
8. Connect the supply cord plug (10) to your mains supply socket (Fig. 12).
9. Withdraw the fruit plunger (3) from the cover feed channel (2).

Operation

1. Start the machine by operating the On button (11).
2. Place the recipient under the bowl spout (4).
3. Introduce the fruits or vegetables into the cover feed channel (2) and push them onto the rotating grater
with the fruit plunger (3).
4. Continue this operation until the juice recipient is full or all the fruit and vegetables to be processed have
been used. Also keep an eye on the level of pulp in the pulp container (6).
HOW TO STOP THE MACHINE
1. By pushing the Off button (12).
2. By turning the clamping handle (1) from the back to the front.
3. By unplugging the mains cord plug (10).
Maintenance
CLEANING
• Handle the basket assembly (5) carefully so as not to move it out of position, causing the machine from
working properly.
• To clean the basket assembly (5), it is recommended to use the brush (25) supplied with the machine, for
proper cleaning of filter sieve holes and the grater teeth (Fig. 15). Do not use abrasive sponge for cleaning
the basket.
• Cleaning will be easier if you do not wait for the food remains to dry in the bowl, basket and cover.
WARNING
During preparation, the level in the pulp container (6) should be monitored to prevent the cover pulp outlet
(2) from clogging. Such clogging could result in an imbalance in the basket assembly (5) and cause a risk of
8