Leica GEOVID HD-B3000 Instrucciones página 59

C. Opening the ballistic curve from the memory
card
When a memory card containing a ballistics curve is
inserted into the binoculars, it can be selected the
same way as described in "Setting the ballistics curve"
on p. 50.
• Once you have pressed the main/trigger
button , the first display in this case will be
1
.
CArd
The following warning will be displayed:
– if the bALL menu was selected and the
Err1
memory card was then removed, or if the
memory card is defective or cannot be
read. will disappear if that is the case.
Card
– if the memory card does not contain a
Err2
ballistics curve
– if the ballistic curve on the memory
Err3
card does not contain correct data
The rest of the procedure is the same as for pro-
grammed ballistics curves.
Notes
• You can select one of the programmed ballistic
curves at any time while a memory card is in-
serted. Make sure to always check your settings.
• A separate microSD card is required for each
ballistics curve. Do not attempt to rename a file
on a microSD card, as the device will otherwise
be unable to access it.
• Only one ballistic curve can be saved on a
memory card for safety reasons and to avoid
confusion.
• Distances of up to 925 m/1000 yds will be
displayed when a ballistics curves from a
memory card is used.
• The range of microSD cards is too large for Leica
Camera AG to exhaustively test all available
types for compatibility and quality. We therefore
recommend using microSDHC™ memory cards
manufactured by SanDisk.
• Although no damage to the binoculars or the
card is generally expected, Leica Camera AG
cannot provide any guarantee of function as
some "no name" cards may not fully comply with
microSD standards.
• Custom zeroing distances on the memory card
will be replaced with pre-installed zeroing dis-
tances.
EN
57