MONCOLHA7PN3 – 7" LCD 16/9 MONITOR WITH REMOTE CONTROL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the MONCOLHA7PN3! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Features
• Full remote control for adjustment of brightness, colour, contrast, tint (only NTSC)
• 3 video inputs (2 with audio)
• OSD (On-Screen Display)
• PAL / NTSC system
• Image can be switched left / right (channel 2 only)
• Comes with: remote control, cable, extra A/V cable, table stand, earphones and car cigarette lighter plug
3. Specifications
Display Mode
Screen Size
Active Area
Resolution
Number of Pixels
Backlight
Colour Configuration
Luminance
Video Input Signal
Audio Input Signal
Audio Output Signal
Power Supply
Power Consumption
Built-in Speaker
Operating Temperature
Storage Temperature
Dimensions
Weight
MONCOLHA7PN3
TFT Active Matrix System (16:9 / 4:3) – new panel!
7"
156 x 88.5mm
1440 (H) x 234 (V)
337 000
cold cathode filament tube
RGB delta
300 – 350cd/m²
1.0Vpp / 75 ohms (composite video signal)
1Vpp @ 10 Kohms
0.5W / 16 ohms
monitor: DC 12V +/- 10% / 1000mA max. (use PS1210R, not incl.)
remote control: 1 x 1.5V CR2025 battery (incl.)
8.5W
0.5W / 16 ohms
0°C to +60°C
-25°C to +80°C
171 x 125 x 19mm
400g
- 1 -
VELLEMAN