4. Front Panel Description
1. Multi-media interface
2. IR eye: receives the remote signal. The remote signal can be
received in a range from 45° on the left side to 45° on the right side.
3. Power ON/OFF: switch the monitor on or off.
4. AV1 / AV2 shift key: shifts from AV1 to AV2.
5. – key: to reduce the entered values.
6. Menu: press this key to adjust brightness, colour, contrast and tint.
7. + key: to increase the entered values.
8. Earphone output
5. Remote Control
1. Power ON/OFF
2. Brightness –
3. Brightness +
4. Colour –
5. Colour +
6. Contrast –
7. Contrast +
8. Volume –
9. Volume +
10. Video select
11. System auto switch
6. Back-Car Rear-view Function
Connect the rear view camera to the AV3 red wire. Choose the right system setting according to the camera. Check
whether your camera has the mirror function. Set the monitor in SYS1 mode if it does, set the monitor in SYS2 mode
if it doesn't.
1. Monitor in POWER OFF mode: the monitor will automatically switch on and show the picture from AV2. Once the
signal from the camera disappears, the monitor will automatically switch off.
2. Monitor in POWER ON mode: the monitor will automatically show the picture from AV2. Once the signal from the
camera disappears, the monitor returns to the original picture.
7. MMI
This is the audio – video signal input/output interface. When the monitor is set to AV2, it displays the video picture
from this plug. With a different cable, the monitor can be connected to different devices.
Accessories: MMI AV cable, standard RCA plug, earphone plug (can supply 1-way audio and 1-way video input).
8. Wiring Diagram
1. Monitor
2. VCD/DVD player
3. Car rear-view camera
4. Multimedia cable
5. Red: video 3 input
6. White: audio 1 input
7. Yellow: video 1 input
8. Black: power input
9. White: audio 2 input
10. Yellow: video 2 input
11. Black: earphone output
The information in this manual is subject to change without prior notice.
MONCOLHA7PN3
- 2 -
VELLEMAN