Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Optional Information
4
Stack the Switch
• Unplug all power cords and use the
included stacking cable to attach the 535T
switch to one of the ports on the Intel
Express Stack Matrix Module installed in
the 530T switch.
• Attach up to three switches to the module
for a total stack height of four switches
(one 530T and three 535T switches).
• The 535T switch must be connected to a
stack matrix module (in a 530T switch) in
order to form a stack. You cannot stack
two 535T switches together.
• The 530T or 535T switches do not stack
with the Intel
Switches or the Intel
550T Routing Switches.
5
Add Optional Modules
• Use optional modules to provide 100FX
connectivity for the stack, or to extend the
network beyond 100 meters.
• Unplug the power cord and remove the
10/100Base-TX module from the Module A
expansion slot on the front of the switch.
• Align the new module with the card guides
inside the switch and slide the module into
the slot. Press firmly to connect the module.
• Secure the module using the retaining
screws and plug in the power cord.
®
Express 510T or 520T
®
Express 550F or
530T Switch
(Control)
535T Switch
(Member)
®
535T Switch
(Member)
535T Switch
(Member)
Figure 4: Connect switches to the stack matrix module
Note: You cannot use the stacking cables or stacking
modules from the 510T, 520T, 550T, and 550F switches
to connect the 530T and 535T switches together.
Int el
®
Ex pr es
s 53 5T
Sw itc h
Stac king
Switc h
Mod ule
Statu s
Statu s
Link
Mod ule
Link \Act
ivity
Link =
Solid Gree
Acti vity
n
= Blink
ing Gree
n
100B ase-
T Mod
ule
Port 1
Port 2
Figure 5: Install optional modules in the 535T switch.
Remove the 10/100 Module before installing a 100FX
module in the Module A slot on the 535T switch.
100Base-FX - SC Module
Port 1
Tx
100Base-FX - MTRJ Module
Port 1
Stack Matrix Module
®
Intel
Express 530T Matrix Module
Switch 1
Switch 2
Switch 3
Matrix Module
Connect to Matrix Module
Stack Interface Module
Connect to Matrix Module
Stack Interface Module
Connect to Matrix Module
Stack Interface Module
Stacking Cable
A
Port 1
Port 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Mod ule
16
A
17
18
19
20
21
22
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Fiber Module (SC connector)
for Express 535T Switch
(ES535MFXSC)
Rx
Fiber Module (MTRJ connector)
for Express 535T Switch
(ES535MFXRJ)
Port 2
AC Inp
100-2
50Hz
1.5A
0
AC Inp
100-2
50Hz
1.5A
AC Inp
100-2
50Hz
1.5A
AC Inp
100-2
50Hz
1.5A
3
Publicidad
Tabla de contenido
