Quick Starts; English - Intel Express 535T Guía De Inicio Rápido Y Del Usuario

Quick Start
1
Install the Switch
• Remove the switch and parts from the box.
• Attach the enclosed brackets if you plan
to mount the switch in a rack.
• Install the Intel
rack or on a shelf.
• Plug in the power cord.
Connect
2
the Devices
• All ports automatically detect the speed
and duplex-mode of any connected
device.
• Connect PCs and print servers to the
switch with straight-through cables.
• Use a crossover cable to connect a switch
to another switch or hub.
• Use only CAT 5 UTP cable to connect
100Mbps devices. To connect 10Mbps
devices, use CAT 3, 4, or 5 UTP cable.
Check the
3
Connections
• Check the port LEDs to confirm the link
status.
• A solid green LED indicates a valid link.
2
®
Express 535T Switch in a
Rack: Use the three small screws to
attach the brackets to the switch.
Int el
® Ex pr es
s 53 5T
Sw itc h
Stac king
Switc h
Mod ule
Statu s
Statu s
Link
Mod ule
A
Port 1
Port 2
10/1 00Ba
se-T Mod
Link \Act ule
ivity 1 2
Link = 3
Solid Gree 4
Acti vity 5
= Blink n 6
ing Gree 7
n
Port 1
Port 2
Mod ule
A
1
2 3
4 5
6
7
8
Shelf: Peel off the protective
backing and attach the rubber
feet to the switch.
Figure 1: Install the Switch
From
straight-through
Switch
straight-through
Switch
crossover
Switch
Figure 2: Connect the Devices
Port LED (Green)
Solid Green = Link
Blinking Green = Activity
n
Figure 3: Check the Connections
8
9 10
11 12
13
14
15 16
17
18
19 20
21
22
9
10 11
12 13
14
15
16 17
18
19
20 21
22
To
PC/Server
Print Server
10/100
Hub or Switch
2 4 6
1 3 5 7
1 3 5 7
2 4 6 8
8
9