Geemarc GCL7400BT Manual Del Usuario página 13

Troubleshooting:
• NO SOUND
1. Ensure the USB cable is properly connected to the power adapter(not including)
and the charging connector on the headphone.
2. Ensure that the headphone On/Off switch is switched to the On Position and the
switch is illuminant Blue.
3. The headphones battery charge level may be too low. Please connect the USB
cable to recharge the batteries until the green light is illuminated on the left hand
headset.
4. Ensure that your mobile phone, DVD, TV set, Hi-Fi system or audio component
is switched on and set Bluetooth ON and paired with the headphone.
5. Use the headphones volume control to increase the sound level (only when use
as a wireless headphone).
6. The audio signal input level is too low. Increase the volume from the audio
source of mobile phone, Hi-Fi, CD, or TV, etc.
7. The paired audio/video equipment may not be in playback mode. Start playback
on by the equipment.
8. The headphones output level is set too low. Adjust the volume to a suitable level.
• DISTORTION
9. Restart the Pairing process (see Page 3).
10.The headphone's batteries charge level may be too low. Recharge the batteries.
11.Ensure that the volume setting is correct.
12.The headphones may be too far away from the music player. Move closer to it.
13.The audio signal input level is too strong. decrease the volume from the audio
source of mobile phone, Hi-Fi, CD, or TV, etc.
English
16