Keypad Zone; Keypad Zone Requires 1K Ωeol Resistor; Keypad Zone Set To Zone 1/Zone 2; Keypad Communication Supervision - Paradox ESPRIT+ 642 Guia De Instalacion

Keypad Zone

Section [2] — Option [1]
Off = Disabled
On = Enabled (default)
This option enables/disables the keypad's on-board zone. Only two
keypad zones are available on an Esprit control panel, and only one
on-board zone per keypad.
Keypad Zone Requires 1k
Section [2] — Option [2]
= No (default)
Off
= Yes
On
When option [2] is off, you do not need to install an EOL resistor.
When option [2] is on, you must install an external 1kΩ EOL resistor
as shown in Figure 1 on page 29.

Keypad Zone Set To Zone 1/Zone 2

Section [2] — Option [3]
Off = Keypad Zone 1 (default)
On = Keypad Zone 2
The Esprit system supports two keypad zones, and this option
determines whether the on-board keypad zone input is identified as
keypad zone 1 or keypad zone 2.

Keypad Communication Supervision

Section [2] — Option [4]
Off = Disabled (default)
On = Enabled
Enable this option to monitor the communication between the control
panel and the keypad. If there is a loss of communication with the
keypad, the control panel generates an open keypad zone. This
Ω
EOL Resistor
Esprit+ 642 5