Indications And Displays; Indications And Displays Of The Receivers; Remote Displays Of An Ew 500 G2 Transmitter - Sennheiser EM 550 G2 Manual De Usuario

8

Indications and displays

Each receiver of the EM 550 G2 provides information on its own operating
states and those of the received ew 500 G2 transmitter (remote displays).

Indications and displays of the receivers

"PILOT" display
The "PILOT" display appears on the display panel when the pilot tone
evaluation is activated (see "Activating/deactivating the pilot tone
evaluation" on page 25).
Diversity display
The receivers operate on the true diversity principle (see "Diversity
reception" on page 31).
The diversity display indicates whether diversity section I (i.e. antenna 1)
or diversity section II (i.e. antenna 2) is active.
Button backlighting
During standby operation, the
receiver is switched on, the
additionally backlit in green.

Remote displays of an ew 500 G2 transmitter

Transmitter battery status indication
The 4-step transmitter battery status display
remaining battery/accupack capacity of the received ew 500 G2 transmitter:
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery icon flashing LOW BAT
In addition, the text "LOW BAT" (backlit in red)
flashes in alternation with the standard display.
ON button is backlit in red. When the
SET button and the
provides information on the
/ button are