General Setup - Plantronics CT10 Manual De Usuario

STEP 1

GENERAL SETUP

SELECTING A LOCATION
Install the CT10 Base Unit
and a modular telephone line jack. The base's location effects the
telephone's range. Try several locations to see which provides the best
performance. Select a location that is away from electrical machinery,
electrical appliances, metal walls, filing cabinets, wireless security alarms,
room monitors, and areas of excessive moisture.
GETTING STARTED
Unpack the unit and check for the following items:
CT10 Remote
Rechargeable Battery
CT10 Base
AC Adapter
Telephone Line Cord
Headset
CONNECTING THE TELEPHONE BASE
Place the Base on its back exposing the AC Adapter Jack
Telephone Jack
Plug the AC Adapter Plug
Adapter into an AC power outlet. The Power Indicator
after being connected. The In-Use Indicator
Connect one end of the Telephone Line Cord
Jack and the other end into a Telephone Wall Jack
Press both the Telephone Line Cord and the AC Adapter Cord into the
Cord Retainer Clip
in a location that is near an AC power outlet
on its underside.
into the AC Adapter Jack
.
. Plug the AC
will remain off.
into the Base's Telephone
.
6
G
G
and
A
G
will light
A