Care And Maintenance - Joie i-Gemm Manual De Instrucciones

7. Press the base release button and
push the base back against the
vehicle seat until tight.
10
8. To release the infant carrier
module, lift the infant carrier
module off while press the infant
carrier module release button.
9. To remove the base, press the
secondary lock button
12
first and then the button
12
on the ISOFIX connectors before
removing the base from the vehicle
seat.
12
11
10
11
2
11
12
-1
-2
2

Care and Maintenance

!
After removing the foam wedge of insert, please store it somewhere
that the child cannot access it.
!
Please wash the seat cover and inner padding with cold water under
30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted detergents, gasoline or other organic solvent to
wash the infant carrier module or base. It may cause damage to the
infant child restraint.
!
Do not twist the seat cover and inner padding in an attempt to dry. It
may leave the seat cover and inner padding with wrinkles.
!
Please hang dry the seat cover and inner padding in the shade.
!
Please remove the infant child restraint and base from the vehicle
seat if not in use for a long period of time. Put the infant child
1
restraint in a cool, dry place and somewhere your child cannot
access it.
1
12